Please fill in as many of following boxes as possible to identify your bearing. If you have a front and rear bearing to identify, please submit the form twice.

Be as accurate as you can but dimensions taken with a ruler usually suffice.  

Your name* :

Your email address* :

Engine manufacturers name :

Engine model/size/ref :

Normal engine use (e.g. aircraft, helicopter etc) :

Bearing position : Front Rear

Bearing outside diameter measurement :

Bearing inside diameter (bore) measurement :

Bearing width measurement :

Any ref numbers marked on the bearing :

Please indicate what seals or shields are fitted : Please select No shields or seals Single seal fitted Two seals fitted Single shields fitted Two shields fitted

(seals usually appear as a black cover over the ball races, shields are metallic in appearance. Where the ball races are visable, no shield or seal is fitted) 

Fields marked with a * are mandatory and your enquiry will not be submitted unless these boxes are filled in.

We give a 10% discount on your bearing purchase if the information submitted adds to our listings. Please note that for the discount to be applied, you must fill in the engine make, model and use boxes as well as the bearing position box.