E Mail : info@modelfixings.com      Tel 0115 8548791      Fax 0871 266 4287       Search our site

BSW Taps

Home Up Tapping Terminology Tapping Guide Metric Taps BA Taps Metric Dies Drill Bits UNC Taps BA Dies Glow Plug Taps UNF Taps UNC & UNF Dies BSW Taps BSF Taps BSW & BSF Dies Trend Snappy

You are here - Home > Drills, Taps & Dies > BSW Taps

 

This page lists our range of BSW (British Standard Whitworth) taps  including taper, second and bottom taps, offered at discounted introductory prices. Also listed below are tap wrenches suitable for use with these taps.

We stock  the most commonly used small sizes - 1/8", 5/32", 3/16" and 1/4". If the size you require isn't listed, please e mail  us - we almost certainly wil be able to supply.

 Other thread forms also available including Metric Coarse, Metric fine, UNC sizes, UNF, BSF,  BSP, NPT, Model Engineer - please click on the thread name to go to the relevant page, or  e mail us with your requirements.

Please note that these are high quality professional standard taps that with correct care and use will give many years of service. Not to be confused with the cheaper and inferior 'market stall' quality tools that are available from some sources and are good for a couple of holes and completely useless when used with certain materials.

All our taps and dies are manufactured from HSS (High Speed Steel) or HQS (a manufacturers brand name for HSS with improved toughness properties)We do not stock low grade carbon steel taps and dies.

These taps are suitable for working with a large range of hard and soft ferrous and non-ferrous metals including stainless steel.

If you have any queries regarding the type of tap you need for a particular job, please do not hesitate to send your questions by e mail to us and we will do our very best to assist.

All prices include 20% VAT  Click here for details

BSW Taps & Tap Drills
Thread Tap type MF Ref Price Each  
1/8" BSW Taper MF-T18BWT 6.50

1/8" BSW Second MF-T18BWS 6.50

1/8" BSW Bottom MF-T18BWB 6.50

1/8" BSW Set of 3 Taps MF-T18BW3 17.55

1/8" BSW Set of 3 Taps + Drill MF-T18BW3D 18.45

2.55mm Tap Drill only MF-DB-255 1.00

         
5/32" BSW Taper MF-T532BWT 7.95

5/32" BSW Second MF-T532BWS 7.95

5/32" BSW Bottom MF-T532BWB 7.95

5/32" BSW Set of 3 Taps MF-T532BW3 21.45

5/32" BSW Set of 3 Taps + Drill MF-T532BW3D 22.30

3.2mm Tap Drill only MF-DB-032 0.95

         
3/16" BSW Taper MF-T316BWT 6.50

3/16" BSW Second MF-T316BWS 6.50

3/16" BSW Bottom MF-T316BWB 6.50

3/16" BSW Set of 3 Taps MF-T316BW3 17.55

3/16" BSW Set of 3 Taps + Drill MF-T316BW3D 18.40

3.7mm Tap Drill only MF-DB-37 0.95

         
1/4" BSW Taper MF-T14BWT 9.75

1/4" BSW Second MF-T14BWS 9.75

1/4" BSW Bottom MF-T14BWB 9.75

1/4" BSW Set of 3 Taps MF-T14BW3 26.35

1/4" BSW Set of 3 Taps + Drill MF-T14BW3D 27.75

5.1mm Tap Drill only MF-DB-51 1.55

         

 

Tap Wrenches
  Range MF Ref Price Each  
2-5mm MF-TW1 5.55

Tee Handled Tap Wrench with chuck suitable for taps from M2 to M4, No 4 to No8 UNC and 8BA to 4BA, 1/8" to 3.16 BSW/BSF. Especially suited for use with the smaller diameter taps
         
2-6mm MF-TW2 9.90

Traditional long adjustable Tap Wrench suitable for taps from M2 to M6, No4 to 1/4" UNC/UNF/BSW/BSF, and 8BA to 2BA.

 

 This page was last modified on : December 16, 2014

Send mail to webmaster@modelfixings.com with questions or comments about this web site.
General & Sales Information: info@modelfixings.com

All Trademarks and Trade names acknowledged.

Model Fixings Ltd trading as Modelfixings.co.uk, Modelfixings.com, Modelbearings.co.uk

Registered in England and Wales, Company No 8887251. Vat No GB917415524

Modelfixings is registered and fully compliant with PCI DSS (Payment Card Industry Data Security Standard) requirements